Solar Power Voltage And Current Monitoring System Using Arduino And Lcd Presentation

Introduction
Solar power voltage and current monitoring system using Arduino and LCD. Monitor and display the voltage and current generated by a solar power system. Arduino microcontroller and LCD screen used for data acquisition and display.	Image Source
		1

Components needed
Arduino board - acts as the main controller for the system. LCD screen - displays the voltage and current readings. Voltage sensor - measures the solar panel voltage.	Image Source
		2

Circuit diagram
Connect the Arduino board to the LCD screen for data display. Connect the voltage sensor to the Arduino analog pin for voltage measurement. Connect the current sensor to the Arduino analog pin for current measurement.	Image Source
		3

Arduino programming
Write a code to read the voltage and current sensor values. Use analogRead() function to read the sensor values from Arduino pins. Convert the analog values to actual voltage and current values using appropriate formulas.	Image Source
		4

Calibration
Calibrate the voltage sensor by comparing its readings with a reliable reference. Adjust the voltage sensor scaling factor in the code to match the reference values. Calibrate the current sensor by comparing its readings with a known load.	Image Source
		5

Data logging
Enhance the system by adding an SD card module for data logging. Use the SD library to create and write data to a log file on the SD card. Log voltage and current readings at regular intervals for analysis and monitoring purposes.	Image Source
		6

Real-time monitoring
Implement a real-time monitoring feature using the Arduino serial communication. Send the voltage and current readings to a computer via the serial port. Develop a computer application to receive and display the data in real-time.	Image Source
		7

Power management
Optimize power consumption by using sleep modes and power-saving techniques. Implement a power management system to reduce the system's overall power consumption. Use low-power components when possible to prolong battery life in off-grid setups.	Image Source
		8

Safety considerations
Ensure proper insulation and protection for all electrical connections. Follow safety guidelines and standards to avoid electrical hazards. Use appropriate fuses and surge protectors to safeguard the system.	Image Source
		9

Conclusion
Solar power voltage and current monitoring system using Arduino and LCD provides valuable insights into solar power generation. Allows users to monitor and analyze the performance of their solar power systems. Enables optimization of solar power systems for increased efficiency and reliability.	Image Source
		10

Join the SlideMake Community